DESCRIPTION
This product is made of high-quality acrylic copolymerization lotion, inorganic pigments, fillers and high-quality additives. It has excellent mold and algae resistance, water resistance, acid and alkali resistance, and long-term outdoor durability.Application
Widely used for exterior wall decoration and protection in real estate, housing projects, factories, and other industries.Performance characteristics
1. The coating is smooth and full, and the construction is simple. 2. Low carbon, environmentally friendly, and green products. 3. Has long-term anti mold and anti algae effects. 4. Strong adhesion and long-lasting coating that does not peel off.Construction technology
1. Base treatment: The base layer should be dry, clean, flat, and firm. Flexible putty or polymer fine mortar with appropriate strength and good water resistance should be used to scrape and level the base layer, usually 2-3 times; 2. Bottom coat construction: Roll or spray 1-2 coats of exterior wall specific primer on the putty layer or other substrate that meets the maintenance requirements; 3. Topcoat construction: After the primer dries, roll or spray two coats of multi-functional environmentally friendly high-grade exterior wall paint.Precautions
1. Strictly follow the substrate treatment method to treat the surface and maintain sufficient curing time for the wall. 2. Suggest using other products provided by our company to ensure construction quality. 3. Diluted paint cannot be poured back into its original packaging. If it cannot be used up in one go after opening, it must be resealed in a timely manner. 4. The dilution ratio of colored paint with water should not exceed 5%, and white paint can be diluted with water up to 15% of the ratio. This product should be stored in a cool, dry place away from light, with a shelf life of 12 months. Construction is not suitable when the temperature is below 5 ° C and above 40 ° CExecution standards
GB/T9755 GB/T24408| Project | TECHNICAL INDEX |
| Main components | Silicon modified acrylic lotion, inorganic pigments and fillers, high-quality additives and water, etc |
| Status in container | After stirring, there are no lumps and it is in a uniform state |
| Surface drying time | ＜2h |
| Repainting interval | ≥6h |
| Theoretical Coverage | 8~12㎡/kg/time |
| Dirt collection | ＜10% |
| Washability | ＞8000times |
| Water resistance(96h) | The coating has no bulging, cracking, or peeling phenomenon |
| Artificial aging resistance | 1000h |
Note: 1. Drying time varies with temperature and humidity, with reference conditions of 25 ℃ and relative humidity<65%
2. The actual usage of the product varies due to different factors such as construction technology, coating thickness, and flatness.
