Product Introduction
This product uses environmentally friendly water-based aliphatic polyurethane dispersion, water-based HDI curing, environmentally friendly pigments, and water-based polymer additives. Ultra low VOC, odorless, excellent resistance and hardness, improving flatness, thereby enhancing transparency and fullness, possessing good toughness and elasticity, providing stone impact resistance, and excellent water resistance.Product Application
Automobiles and locomotives, construction machinery, mechanical decoration, and vehicle components.Instructions
1. Surface treatment: Before painting, the surface of the substrate should be cleaned of oil stains, rust, and other dirt to ensure that the substrate is clean, dry, and free of pollution. Polish the welding slag on the metal surface until it is smooth, sandblasting to Sa2.5 level or manually polishing to St2 level. 2. Dilution ratio: Before construction, mix the original paint evenly, add curing agent and purified water in proportion, and stir while adding. After mixing evenly, let it sit for 3-5 minutes before construction. The mixed paint should be used up in about 4 hours. Please request detailed construction instructions from our company for the specific construction ratio. 3. Construction method and tools: This product is recommended to be sprayed for construction, and can be baked at 60-80 ° C. Before baking, let it stand and level for 5 minutes. Maintain a dry and ventilated construction environment, with a recommended construction temperature of ≥ 5 ° C; Humidity<; 75% R.C.Storage and transportation
1. The product should be stored in a dry and ventilated place, with a storage temperature greater than 0 ° C~40 ° C, to prevent water immersion, and kept away from heat sources. 2. The storage period is 12 months. If it exceeds the storage period, it can be inspected and can still be used if it meets the standards. 3. Protect the product from rain, sun, and severe cold during transportation. It should comply with the regulations of the transportation department.| Project | Parameter detection | Standard |
| Color and appearance | Multiple colors | Visualization |
| Solid Content% | ≥50 | GB/T1725-2007 |
| Hardness (pencil) | H | GB/T6739-2006 |
| Adhesion | Level 1 | GB/T1720-79(89) |
| FlexibilityMM | ≤2 | GB/T1731-79(93) |
| Impact resistanceKG/CM | 50 | GB/T1732-93 |
| Salt spray resistanceH | 500H | GB/T1771-2007 |
| Drying time(25℃)H | Surface0.5H | GB/T1728-79(89) |
| Drying time(25℃)H | Actual drying12H | GB/T1728-79(89) |
