DESCRIPTION
It is developed with advanced technology by using high weather resistance water-based fluorocarbon lotion, imported rutile titanium dioxide, high-quality additives, etc. It has excellent outdoor durability, stain resistance, mold resistance and algae resistance, and has long-term decorative and protective effects on buildings.application
Widely used for exterior wall decoration and protection of iconic buildings such as banks, hotels, government buildings, and convention centers.Performance characteristics
Widely used for exterior wall decoration and protection of iconic buildings such as banks, hotels, government buildings, and convention centers.Construction technology
1. Base treatment: The base layer needs to be dry, clean, flat, and firm. Use flexible putty or polymer fine mortar with appropriate strength and good water resistance to scrape the base layer flat, usually 2-3 times. 2. Bottom coat construction: Roll or spray 1-2 coats of exterior wall specific primer on the putty layer or other substrate that meets the maintenance requirements. 3. Topcoat construction: After the primer dries, roll or spray two coats of ultra durable water-based fluorocarbon exterior wall paint.precautions
1. Strictly follow the substrate treatment method to treat the surface and maintain sufficient curing time for the wall 2. Suggest using other products provided by our company to ensure construction quality. 3. Diluted paint cannot be poured back into its original packaging. If it cannot be used up in one go after opening, it must be resealed in a timely manner. 4. The dilution ratio of colored paint with water should not exceed 5%, and white paint can be diluted with water up to 15% of the ratio. 5. This product should be stored in a cool, dry place away from light, and has a shelf life of 12 months. Construction is not suitable when the temperature is below 5 ° C and above 40 ° C.Execution standards
GB/T9755 GB/T24408| Project | TECHNICAL INDEX |
| Main components | Waterborne fluorocarbon lotion, inorganic pigments and fillers, high-quality additives and water |
| Status in container | After stirring, there are no lumps and it is in a uniform state |
| colour | White or customer specified color |
| surface drying time | ＜2h |
| Repainting interval | ≥6h |
| Theoretical Coverage | ＜8% |
| dirt collection | 8~12㎡/kg/time |
| Washability | 10000 次 |
| water resistance (96h) | The coating has no bulging, cracking, or peeling phenomenon |
| Artificial aging resistance | ＞2000h |
Note: 1. Drying time varies with temperature and humidity, with reference conditions of 25 ℃ and relative humidity<65%
2. The actual usage of the product varies due to different factors such as construction technology, coating thickness, and flatness.
